Tow ball / Tow Hitch – Anti-Rattle & Anti-Theft clamp

• It clamps your removable tow ball hitch/pin/shaft securely in its receiver to prevent rattling
• Custom High tensile M12 Square U-bolt and plate to fit multiple tow hitches
• 110 (H) x 90mm (W) x 60mm (deep)

Benefits

• Interchangeable/reusable with multiple vehicles
• Reduces quick theft of removable tow ball hitch if you don’t lock your original locking pin

Notes

• To be used in conjunction with the original tow Hitches locking pin.
• Fits removable tow hitch/pin/shaft up to 54mm wide
• It only replaces the failed, original, Anti-rattle clamping mechanism on original hitch.
• DOUBLE Check: that there is a 12mm gap between the lip of or the receiver (the square tube) and the back of the removable pin (tow ball assembly). The welds on the pin (behind tow ball plate) sometimes reduce the gap to less than 12mm which wont allow the 12mm U -Bolt to sit cleanly and flush on the actually tow pin.
• solution if you have welds that obstruct the U-Bolt placement , is to re-drill new 16mm holes in the Tow hitch Pin to allow the ball sit a bit further away from vehicle